Magnetized Metal Detector NT-series is ultra-sensitive detectors, which have been difficult with conventional metal detectors and feature special magnetic sensors to detect minute magnetic metal contaminants and, in particular, minute SUS wires (Fe φ 0.4mm, SUS φ 0.2 x 2 mm) .
Because the sensor catches only weak magnetic fields generated by magnetic metals, it is not affected by the form of packaging (including aluminum foil wrapping material and aluminum tray) and properties (temperature, salinity, moisture content, etc.) of the object to be inspected.
* Stainless-steel magnetized under stress
such as iron and cutting or bending
* Sensitivity at the center of the belt surface
Ultrasensitive detection
Since NT series only catches magnetic fields generated by magnetic metals, there is no influence of the subject to be inspected, and the sensitivity shown in the catalog remains the same as the practical sensitivity.
More Effective
Compared with conventional metal detectors and X-ray foreign matter inspection equipment, this detector can detect SUS wire φ 0.2 × 2mm with less head of detection accuracy due to the approach direction of wire-like metal.
Smallest Running Cost
There is no consumable parts like X-ray Inspector, so the running cost is as energy-saving as the conventional metal detector.
Easy Operation
Easy to use anywhere without complicated initial settings or the need for sensitivity switching for each product. They can be used with the same settings, even if they differ in nature or state.
Detail
| Model | NT3R-J6B | NT3R-K4B | NT3R-L2B | |
|---|---|---|---|---|
| Belt Width | 150mm | 250mm | 350mm | |
| Sensitivity | Fe 0.4 mm dia. / SUS wire L.2 mm x 0.2 mm dia | |||
| Belt speed | 10 - 60 m / min. (adjsutable) | |||
| Length/Passline | 1460mm/750mm±50mm | 1760mm/750mm±50mm | ||
| Power | AC 100 ~ 240 V 50/60Hz, Single phase | |||
